Easily constructed flyscreens for wooden, steel and aluminium windows.

Kits available in Black, White, Brown and Beige

Make your own magnetic flyscreens.

Parts Required:

Flyscreen Mesh, Self Adhesive Magnetic Tape, Plastic Edging and Self Adhesive Corner Pieces.

Easy Installment instructions:

1.Ensure surface is flat and at least 15mm wide

2.Clean surface of all grease and dirt then wipe in one direction with alcohol wipe

3.Cut self adhesive magnetic tape to size with scissors or knife

4.Ensure horizontal lengths are full length and vertical lengths are cut 25mm shorter. Do not angle cut magnetic tapes

5.Remove backing tape from one side of the magnetic tape, part A and adhere to window frame. Ensure a 2mm gap on the outer side to allow for the plastic edging

6.Place part B of magnetic tape on part A, magnetic to magnetic.

7.Remove backing tape from part B magnetic tape. Stretch mesh and fix to magnetic tape

8.Trim mesh to fit frame

9.Cut plastic edging to size. Ensure horizontals are 30mm shorter than the frame size and vertical lengths are full lengths. This ensures there is no weak spot in the corners

10.Using a caulking gun (not supplied) apply thin bead of V60 Glazing Silicone to mesh and magnetic strip and apply plastic edging. Push firmly

11.Remove backing tape and apply self adhesive corner pieces into position

12.Allow 24hrs to dry before lifting screen off magnetic tape

Now also avaliable at the NEW Central Coast Branch

6 Bottlebrush Close, Wyoming   NSW   2250

0414 574 807

To purchase, type quantity in box and click shopping trolley icon